Safe State In Case Of An Error - SICK IN3000 Direct Mode D'emploi

Chapter 7
78
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
Fault diagnosis
7.3

Safe state in case of an error

On the occurrence of an error that results in the loss
of the safety function, the safety switch adopts a de-
fined, safe state. The safety switch remains in this
state until the error or the cause of the error has been
rectified (see 9.1 "Technical specifications" on
page 80).
Errors that can result in the loss of the safety function,
can be e.g.:
safety-related internal errors
supply voltage loss
loss of the assured detection capability
Operating instructions
IN3000 Direct
8014173/YIJ3/2016-04-18
Subject to change without notice