Error Display; Factory Setting - SICK T&D PBS Mode D'emploi

Operating Instructions
Parameter Description
0SET Zero Point adjustment (+ 3% of Nominal Pressure)
DISM Display value in Display Mode
ACT = Current System Pressure
LOW, HIGH = Minimum, Maximum System Pressure
SP1(FH1), RP1(FL1), SP2(FH2), RP2(FL2), OFF = Display off
DISU Display-Update 1, 2, 5, 10 Updates/Second
DISR Display rotate 180°
RHL Clear the Min- and Max-value memory
PAS Password input, 0000 = no password
Password input Digit by Digit
TAG Input of a 16-digit alphanumeric Measuring Point number

Error display

Error Description
ATT1 On changing the Switch Point the system automatically reduces the Reset Point
ATT2 Zero Point adjustment error, current pressure is outside the limits
ATT3 Password entered for Menu access is incorrect
ERR Internal error
OL Overpressure, measuring range exceeded > approx. 5% (Display blinks)
UL Underpressure, under measuring range < approx. 5% (Display blinks)
Menu (Programming and Factory Setting)
Display-Mode
Long press on Menu Key
Programming-Mode
SP1 / FH1
RP1 / FL1
SP2 / FH2
RP2 / FL2
36 © SICK AG • Germany • All rights reserved • Subject to change without notice 8013154/U275/2010/02/01
7. Starting, operation
Acknowledgement of an Error Display by pressing the „Enter" key.
(Min: LLR + 0,5%
value
(Min: LLR
value
(Min: LLR + 0,5%
value
(Min: LLR
value

Factory Setting:

Max: ULR) Instrument Nominal Pressure
Max: SP1 - 0.5%) Instrument Nominal Pressure - 10%
Max: ULR) Instrument Nominal Pressure
Max: SP2 - 0.5%) Instrument Nominal Pressure- 10%
PBS