Printing / It Interface (With Optional Rs232 Interface); Alibi Memory (Option For Verifiable Data Transmission) - Soehnle 7730.65.001 Mode D'emploi

5.8

Printing / IT interface (with optional RS232 interface)

5.9

Alibi memory (option for verifiable data transmission)

www.soehnle-professional.com
44
5 Slave display
6 Slave display
The hold mode is disabled with the function key.
A printer or IT / PC can be connected to the standard terminal with the
optional RS232 serial interface.
The interface function is configured as per the separate description
470.702.099 user mode 3710 and 470.508.077 Data interface 3710.
A printout of the data record transmission can be initiated with the print
key or with an IT request.
The alibi memory is enabled in setup mode (see separate description
470.702.099 User mode 3710). When the alibi memory is enabled, an
arrow points to the corresponding symbol. The arrow blinks as soon as
the entered threshold value for the full message has been reached.
The entry is saved into alibi memory by pressing the print key or via IT
request. Either the print image or the IT data record must be configured
appropriately (separate description 470.508.077 Data interface).
Data is retrieved from alibi memory (display/print entries) in
setup mode:
Print together with the ON/OFF key for 5 seconds until
Press and hold
is displayed.
Press the tare key until is displayed and enter with the print key.
Then continue paging with the tare key to position 03 and enter with the
print key.
The number of the last saved data record is displayed. By changing the
sequential number with the arrow keys (tare / function key), each data
record can be retrieved and displayed by pressing the print key. The
selected data record is paged through as follows:
On/Off key
Removal of load from scale
44