Implémentation MIDI
Channel mode messages
Local On/Off (Controller number 122)
Status
2nd byte
BnH
7AH
n=MIDI channel number:0H - FH (ch.1 - ch.16)
vv=Value:
00H, 7FH (Local Off, Local On)
All notes off (Controller number 123)
Status
2nd byte
BnH
7BH
n=MIDI channel number:0H - FH (ch.1 - ch.16)
* When an All Note Off message is received, all notes of the corresponding channel that
are on will be sent Note Off's, and the resulting Note Off messages will be recorded.
3.3 Messages acknowledged for synchronization
System Common messages
Tune Request
Status
F6H
Song Position Pointer
Status
2nd byte
F2H
mmH
mm, ll=value:
00 00H - 7F 7FH (0 - 16383)
* Received when Remote MIDI In parameter (SONG SETUP/SYNC) is set to On.
System Realtime Messages
Start
Status
FAH
* Received when Remote MIDI In parameter (SONG SETUP/SYNC) is set to On.
Continue
Status
FBH
* Received when Remote MIDI In parameter (SONG SETUP/SYNC) is set to On.
Stop
Status
FCH
* Received when Remote MIDI In parameter (SONG SETUP/SYNC) is set to On.
416
3rd byte
vvH
3rd byte
00H
3rd byte
llH
System Exclusive Message
MIDI Machine Control (MMC)
* Received when the MMC Mode parameter (System/Sync/Tempo) is SLAVE.
STOP (MCS)
Status
Data byte
F0H
7FH, dev, 06H, 01H
Byte
Remarks
F0H
Exclusive status
7FH
Universal System Exclusive Realtime Header
7FH
Device ID
06H
MMC command message
01H
STOP (MCS)
F7H
EOX (End of Exclusive)
DEFERRED PLAY (MCS)
Status
Data byte
F0H
7FH, dev, 06H, 03H
Byte
Remarks
F0H
Exclusive status
7FH
Universal System Exclusive Realtime Header
7FH
Device ID
06H
MMC command message
03H
DEFERRED PLAY (MCS)
F7H
EOX (End of Exclusive)
LOCATE (MCP)
Format2---LOCATE [TARGET]
Status
Data byte
F0H
7FH, dev, 06H, 44H, 06H, 01H,
hrH, mnH, scH, frH, ffH
Byte
Remarks
F0H
Exclusive status
7FH
Universal System Exclusive Realtime Header
7FH
Device ID
06H
MMC command message
44H
LOCATE (MCP)
06H
Byte count
01H
"TARGET" sub-Command
hrH
Standard Time Specification with subframes (typeff)
mnH
scH
frH
ffH
F7H
EOX (End of Exclusive)
Status
F7H
Status
F7H
Status
F7H