The Menu; Changing Settings; How To Change Settings; Call Up Menu - KERN ABT Serie Mode D'emploi

12 The menu

To adapt the behaviour of the balance to your requirements, go to the balance mode
menu. Usually the default setting of the balance mode menu is such that you do not
need to make any changes. If you encounter special conditions of use, go to the bal-
ance mode menu in order to set your balance according to your individual require-
ments.

12.1 Changing settings

To change the settings of specific functions, select the related functions.
Functions are changed by taking the following three steps:
 Call up menu
 Set function
 Confirm and store
When setting a function the ON/OFF, CAL and TARE keys have special functions.

12.2 How to change settings

• CAL key = Select menu and pass through menu items from top to bot-
tom (↓).
• TARE key = Select function.
After selecting the function on the display by pressing the CAL key, the
change is invoked by pressing the TARE key.
• CAL key = Select one of the possible settings within the function. Pass-
ing through menu items from top to bottom.
• TARE key = Store the setting momentarily appearing on the display by
actuating the TARE key.
The standstill display
• ON/OFF key = Exit function
Brief actuation of ON/OFF key:
Back to previous menu.
Long actuation of ON/OFF key:
Back to weighing mode.
38
shows the present setting for the function.
ABT-NM-BA-e-1622