User Settings - KERN ABT Serie Mode D'emploi

Selecting one of standard Settings:
Repeatedly press the [CAL] key until "intFACE" appears.
Press [TARE] key
Repeatedly press the [CAL] key until the desired standard setting
appears.
Confirm your selection by pressing the [TARE] key.
Repeatedly press the [ON/OFF] key. The balance returns to toler-
ance weighing mode.

15.5 User Settings

The user setting allows individual setting for each item in communication settings.
Repeatedly press the [CAL] key until "intFACE" appears.
Press [TARE] key
Repeatedly press the [CAL] key until "iF:USEr" appears.
Press [TARE] key
(Example)
Use the [CAL] key to select between the following settings
(The **** reflect the current setting, two to four characters):
"io.b:****" Speed of communication
"io.d:****" Delimiter
"io.P:****" Parity
"io.S:****" Stop bit
"io.F:****" Data format
"io.H:****" handshake
Confirm your selection by pressing the [TARE] key and set the
parameters you require as follows:
ABT-NM-BA-e-1622 67