Mains Connection; Connection Of Peripheral Devices - KERN ABT Serie Mode D'emploi

7.3 Mains connection

Power is supplied via the external mains power supply. The stated voltage value
must be the same as the local voltage. Only use original KERN mains power sup-
plies. Using other makes requires consent by KERN.

7.4 Connection of peripheral devices

Before connecting or disconnecting of additional devices (printer, PC) to the data
interface, always disconnect the balance from the power supply.
With your balance, only use accessories and peripheral devices by KERN, as they
are ideally tuned to your balance.
Terminal for external devices:
1 RS -232 interface
2 Mains connector
3 Anti-theft safety device (for chains or other fastenings)
4 Connection earthing terminal
18
1
2
3
4
ABT-NM-BA-e-1622