Percent Determination - KERN ABT Serie Mode D'emploi

Note:
Error message "Err 20" indicates that the weight for the reference piece number is
too low.

14.2 Percent determination

Percent weighing allows to display weight in percent, in relation to a reference
weight. The displayed weighing value is stored as a standard percent value
(default setting: 100%).
Condition: Function "U- %" is activated (ch. 11.3)
(When PCS is used
for the first time)
ABT-NM-BA-e-1622
Remove reference weight.
Now you can fill the items to be counted into the container.
The respective quantity is shown in the display.
Repeated pressing of the [UNIT] key changes the display value,
e. g.: [g] → [%] → [Pcs] → [ct]
Repeatedly press the [UNIT] key until the display is in percent-
age determination mode. The display symbol % pops up.
If you are using a weighing container use the [TARE] key for
taring.
Put on reference weight (=100%)
(minimum weight: Readability d x 100)
When standstill control ( ) is complete, press the [CAL] key.
The reference weight is saved.
Remove reference weight.
From now on the placed weight will be shown as %.
Repeated pressing of the [UNIT] key changes the display value,
e. g.: [g] → [%] → [Pcs] → [ct]
55