Menu; Navigation In The Menu; Overview - KERN KFE-TM Instructions D'utilisation

8 Menu

8.1 Navigation in the menu

Call up menu
Select menu block
Select setting
Change settings
Acknowledge setting /
exit the menu
Return to weighing
mode

8.2 Overview

Menu block Menu item
SET Lo
Weighing with
tolerance range
SET Hi
to Clr
to P-C
to Prt
Weighing Units
SET dA
Date/time
SET ti
26
 In weighing mode press
and the first menu block
 With help of
, the individual menu blocks can be
selected one after the other.
 Confirm selected menu item by pressing
current setting will be displayed.
 To change to the available settings, press the
navigations keys as described in chpt. 2.1.1.
 Either save by pressing
 Press
repeatedly to exit menu.
Available settings / explanation
Upper limit value, input see chapter 7.6
(factory setting 000.000)
Lower limit value, input see chapter 7.6
(factory setting 000.000)
Not documented
Not documented
Not documented
Factory setting „kg", no further units available.
Set date
Press and the currently set date (yy.mm.dd)
will be displayed. To make changes, press the
navigation keys as explained in chpt. 2.1.1.
Set time
Press and the currently set time (hh.m.ss) will
be displayed. To make changes, press the
navigation keys as explained in chpt. 2.1.1.
and at the same time
will appear.
. The
or cancel by pressing
KFE-TM-BA_IA-e-1614
.