Communication Speed Settings; Delimiter Settings; Parity Settings - KERN ABT Serie Mode D'emploi

15.5.1 Communication speed settings

1. The display changes from "io.b:****" to "b-300". Pressing the [CAL] key changes the
display. The standstill display ( ) marks the current setting.
Display during setting
Setting specifics
Display during setting
Setting specifics
2. Confirm your desired setting by pressing the [TARE] key.
3. To return to "io.S:****", press the [ON/OFF] key.

15.5.2 Delimiter settings

1. The display changes from "io.d:****" to "d-Cr". Pressing the [CAL] key changes the
display. The standstill display ( ) marks the current setting.
Display during setting
Setting specifics
2. Confirm your desired setting by pressing the [TARE] key.
3. To return to "io.d:****", press the [ON/OFF] key.

15.5.3 Parity settings

1. The display changes from "io.P:****" to "P-no". Pressing the [CAL] key changes the
display. The standstill display ( ) marks the current setting.
Display during setting
Setting specifics
2. Confirm your desired setting by pressing the [TARE] key.
3. To return to "io.P:****", press the [ON/OFF] key.
68
b-300 b-600
300bps 600bps
Baud Rate Baud Rate
b-9600 b-19.2K
9600bps 19.2Kbps
Baud Rate Baud Rate
d-Cr d-LF
C/R L/F
P-no
No parity
(eight bits)
b-1200 b-2400
1200bps 2400bps
Baud Rate Baud Rate
b-38.4K
38.4Kbps
Baud Rate
d-CrLF d-Cn
C/R + L/F Comma
P-odd
Odd parity
(seven bits)
ABT-NM-BA-e-1622
b-4800
4800bps
Baud Rate
d-win 1 d-win -
Not documented
P-EvEn
Even parity
(seven bits)