Adjustment Via Preset Process; Selecting Default Adjustment Method - KERN ABT Serie Mode D'emploi

8.3 Adjustment via preset process

It is possible to start the preset adjustment method without having to access the
menu. When in weighing mode, the preset adjustment method can be carried out by
simply actuating the [CAL] key, followed by [TARE].

8.3.1 Selecting default adjustment method

Press the [CAL] key repeatedly until "SettinG" appears.
Press the [TARE] key. The display shows "CAL dEF".
Press the [TARE] key. The display shows "E CAL"
Press
The standstill display (
displayed.
Select amongst the following four types:
Confirm your setting by pressing the [TARE] key. The display
shows "CAL dEF".
To exit the function, press the [ON/OFF] key.
Brief actuation of ON/OFF key:
Back to previous menu.
Long actuation of ON/OFF key:
Back to weighing mode.
The selected adjustment can be carried out by simply actuating
the [CAL] key followed by [TARE].
24
the [CAL] key repeatedly until the desired setting appears.
Not documented
Adjustment test with external weight
(see ch. 8.3.4)
Adjustment test with internal weight
(see ch. 8.3.2)
Adjustment test with internal weight
(see ch. 8.3.3)
) appears when current adjustment is
ABT-NM-BA-e-1622