Auto Zero - KERN ABT Serie Mode D'emploi

13.3 Auto Zero

This function is used to tare small variations in weight automatically.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the "stability compensa-
tion" in the balance. (e.g. slow flow of liquids from a container placed on the balance,
evaporating processes).
When apportioning involves small variations of weight, it is advisable to switch off
this function.
(Example)

50
Repeatedly press the [CAL] key until "FUnC.SEL" appears.
Press [TARE] key
Repeatedly press the [CAL] key until the current "trC:**" setting
appears.
Press [TARE] key
You can use the [CAL] key to select between the following set-
tings:
"trC-on" Function activated
"trC-oF" Function deactivated
The current setting is marked by the stability symbol ( ).
Confirm your selection by pressing the [TARE] key
To exit the function, press the [ON/OFF] key.
Brief actuation of ON/OFF key:
Back to previous menu.
Long actuation of ON/OFF key:
Back to weighing mode.
ABT-NM-BA-e-1622