Lenze 8200 vector Instructions De Montage page 130

4 Mechanical installation
Standard devices with a power of 55 kW
Mounting with fixing brackets (standard)
8200 vector
E82EV553K4B2xx
1)
If the function module is attached: observe mounting clearance and cable bending radius. The terminals of function
modules in PT design protrude above the housing by 8 mm.
Controller variant "3xx" (with fully mounted footprint filter)
For this mounting variant you require controller type E82EVxxxK4B3xx.
c
8200 vector
E82EV553K4B3xx E82ZN55334B230 340 729 591 283 28.5 672
1)
If the function module is attached: observe mounting clearance and cable bending radius. The terminals of function
modules in PT design protrude above the housing by 8 mm.
2)
The integrated mains filters are only designed for controller operation at rated power. Different filters with different
dimensions are possible (
130
a b b1
340 672 591
l
c1
a

Loosen both screws to be able to remove the housing cover. The assembly kit is located under
the housing cover.
‚
Installation of mounting angles
ƒ
Dimensions
0
Arrange the controllers side by side with spacing to be able to disassemble the eyebolts.
integr. mains a
2)
filter
^ 140
).
l
Dimensions [mm]
c c1 d d1
28.5 283 615 38
e
Dimensions [mm]
b b1 c c1 d
1)
e g k m
285 11 28 18
0
³ 100 mm
³ 50 mm
³ 100mm
k
g
m
8200vec298
1)
d1 d2 e g k
38 615 375 11 28
EDK82EV903 DE/EN/FR 5.1
³ 50 m
m
18