Standard Devices With A Power Of 55 Kw; Mounting With Fixing Brackets (Standard) - Lenze 8200 vector Instructions De Montage

4.4

Standard devices with a power of 55 kW

4.4.1

Mounting with fixing brackets (standard)

Mounting material required from the scope of supply:
Description
Fixing bracket
Hexagon head cap screw M8 × 16 mm
(DIN 933)
Washer Æ 8.4 mm (DIN 125)
Spring washer Æ 8 mm (DIN 127)
Controller variant "2xx" (without fully assembled footprint filter)
For this mounting variant you require controller type E82EVxxxK4B2xx.
)
Note!
Before assembling the controller, please read the documentation for the
components connected on the supply side (mains choke, filter).
c
EDK82EV903 DE/EN/FR 5.1
Mounting with fixing brackets (standard)
l
c1
a

Loosen both screws to be able to remove the housing cover. The assembly kit is located under
the housing cover.
‚
Installation of mounting angles
ƒ
Dimensions
0
Arrange the controllers side by side with spacing to be able to disassemble the eyebolts.
l
Mechanical installation
Standard devices with a power of 55 kW
Use
Drive controller fixing
Mounting of fixing bracket to the drive controller
For hexagon head cap screw
For hexagon head cap screw
e
4
Quantity
4
4
4
4
0
³ 100 mm
³ 50 mm
³ 50 m
³ 100mm
k
g
m
9300vec175
129