ECOFOREST Cantina Super Manuel D'installation Et Maintenance page 47

exchanger parts which cannot be accessed with the cleaning rake. Replace the lid joints of the exchanger is
necessary.
q
Top lid of the exchanger.
w
Front lid of cleaning exchanger.
e
Cleaning brush.
5.8.
Ash box and cleaning oulet.
In Hidrocopper models as shown in the drawing below, you Access to the ash box and the cleaning outlet,
which must be thoroughly cleaned, just like the collector of gas outlet, since its proper operation will depend
on a correct cleaning.
q
Trim door of the ash box.
w
Ash box.
e
Cleaning outlet.
In the Insert model, cleaning outlets are on both sides. To clean them, you should perform the same way as
in the Hidrocopper models.
46
Drawing 25
Drawing 26