Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
remove them. Remove the hexagonal cap screws (
the drawers. Once you removed all the screws, put the rods through the holes of the side part which you
want to use. In order to performance the rake cleaning movements, coil the rods internally in the rake and
place the handle. Finally, seal the unused holes of the side part, using the hexagonal cap screws previously
removed.
5.2.
Ash in the fireplace.
When opening the door, you reach the burn pot where combustion takes place; hoover it and remove it
(make sure you'll put it back properly) in order to clean all holes; make sure they're clean and hoover the
support of the burn pot as well. In drawing 19 are shown the burn pots used in this manual.
5.3.
Fire basket's door.
Clean the glass with a towel, using a liquid for glass cleaning, always when cold.
We have available as an option a window cleaner, See quartering of the boiler.
The handle, though adjusted with an auto-blocking screw, should be revised periodically to be adjusted
whenever needed so as to remain tight.
5.4.
Security grill of the fireplace.
Simply brush the grill descaling the soot which may be adhered, using the cleaning brush sent in a cardboard
box inside the boiler fireplace.
q
Cleaning brush.
w
Security grill of the fireplace.
q
) which maintain sealed the holes for the unused rods of
Drawing 18
Drawing 19
43
Drawing 20
Publicité
Table des Matières
