ECOFOREST Cantina Super Manuel D'installation Et Maintenance page 40

4.45. Install the Hidrocopper boiler as show on drawing 8 make sure to use a metallic cap and a stainless steel pipe
for gas outlet.
q
Windbreak.
e
T of 135° with outlet.
r
Elbow of 45°.
y
Wooden ground.
u
Non flammable floor protection.
i
80mm gap.
a
Stainless steel flexible tube.
s
Rigid flexible pole adapter.
d
Metal cover.
In the case of Super Insert (drawing 9) it will not be necessary to install a "T" 45° elbow, as the pipe comes
outside in vertical and the insert collector has a cleaning outlet. Nevertheless, it is always advisable to include
the "T" in the installation, as shown in drawing 9.
When the boiler is introduced in the insert, you should lock the front wheels brakes and unlock them when
you want to push or pull the boiler.
q
Windbreak.
w
Stainless steel hose clamp.
e
T of 135° with outlet.
y
Wooden ground.
u
Non flammable floor protection.
i
80mm gap.
a
Stainless steel flexible tube.
s
Rigid flexible pole adapter.
d
Metal cover.
When installing a flexible tube for gas outlet, be careful that this is not in contact or close to the circuit board
or combustible material.
INSTALLATION OF THE BOILER WITH A FRENCH CHIMNEY.
39
Drawing 8
Drawing 9