ECOFOREST Cantina Super Manuel D'installation Et Maintenance page 32

Masquer les pouces Voir aussi pour Cantina Super:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
PLEASE READ THIS MANUAL COMPLETELY BEFORE THE INSTALLATION OF YOUR PELLETS
(BIOMASS) BOILER.
NOT CONSIDERING PRESENT INSTRUCTIONS MAY CAUSE DOMESTIC AND/OR PERSONAL
DAMAGES.
The first step consists in connecting the boiler to current.
On the display panel, a start-up sequence appears indicating the model of your boiler, the version of the
software as well as the last date of revision of the software.
Then, add pellets in the fuel hopper the and close the door.
Once these operations achieved, please make sure the hopper is free from any object that might prevent
combustion – that is, it should contain only the burn pot.
Make sure the glass door is perfectly closed to ensure optimal operation.
Now, the boiler can be turned on. At first operation, it is necessary to open the windows as a light smell of
paint might appear.
Press the On button (
This process goes through different phases: ignition, preheating, and normal operation. This is the process
where the flame first appears. The preheating is a completely automatic step during which the boiler will reach the
minimum temperature level. The normal functioning step is where the boiler is ready to get the temperature that
you will indicate.
In order to increase or decrease the temperature, please push the increase button (
or the decrease button (
To stop it, please press the off button (
Programming will be done with the MENU button (
In any case, and after these brief explanations, it is highly recommended to read the IOM manual carefully so
as to avoid eventual mistakes in the installation and use.
QUICK MANUAL FOR START-UP.
X
) represented by
C
) represented by symbol "
X
q
Menu button.
w
Turning on-off button.
e
Fuel decreasing button.
r
Fuel increasing button.
t
Liquid crystal display (LCD).
y
Infrared receiver.
w
symbol, the boiler will turn on automatically.
e
" as you wish.
) represented by symbol
Z
), (see point 8 of the instructions manual).
31
) represented by "
V
; please do not disconnect the boiler.
w
"
r

Publicité

Table des Matières
loading

Table des Matières