ECOFOREST Cantina Super Manuel D'installation Et Maintenance page 197

CONTROL OF THE REVISIONS AND ANNUAL MAINTENANCE.
In order to optimize the functioning of your boiler ECOFOREST it is necessary to carry out the operations of
maintenance detailed in chapter 11 of the instructions manual. Those that shall be done annually must be carried
out by an authorized technician. Contact your distributor so that he sends you the qualified personnel required.
Consider than in order not to lose the warranty of your boiler, you must carry out this annual maintenance and for it
to remain valid, the technician who carries it out must fill in, sign (or stamp) the following forms:
Name of technician:
Date:
Clean heat exchanger pipes.
Clean fireplace. (lateral holes).
Dismantle extractor and clean collector of gas outlet.
Clean gas outlet extractor.
Replace extractor joints, both from socket and
motor.
Clean gas outlet pipe and check it is in perfect
condition.
Make sure the basket isn't bended nor broken.
Check ashtray's and door's joint.
After cleaning, make sure the boiler operates
correctly.
If everything works properly, disconnect the boiler
until next use.
Stamp or signature:
Name of technician:
Date:
Clean heat exchanger pipes.
Clean fireplace. (lateral holes).
Dismantle extractor and clean collector of gas outlet.
Clean gas outlet extractor.
Replace extractor joints, both from socket and
motor.
Clean gas outlet pipe and check it is in perfect
condition.
Make sure the basket isn't bended nor broken.
Check ashtray's and door's joint.
After cleaning, make sure the boiler operates
correctly.
If everything works properly, disconnect the boiler
until next use.
Stamp or signature:
Name of technician:
Date:
Clean heat exchanger pipes.
Clean fireplace. (lateral holes).
Dismantle extractor and clean collector of gas outlet.
Clean gas outlet extractor.
Replace extractor joints, both from socket and
motor.
Clean gas outlet pipe and check it is in perfect
condition.
Make sure the basket isn't bended nor broken.
Check ashtray's and door's joint.
After cleaning, make sure the boiler operates
correctly
If everything works properly, disconnect the boiler
until next use.
Stamp or signature:
Name of technician:
Date:
Clean heat exchanger pipes.
Clean fireplace. (lateral holes).
Dismantle extractor and clean collector of gas outlet.
Clean gas outlet extractor.
Replace extractor joints, both from socket and
motor.
Clean gas outlet pipe and check it is in perfect
condition.
Make sure the basket isn't bended nor broken.
Check ashtray's and door's joint.
After cleaning, make sure the boiler operates
correctly
If everything works properly, disconnect the boiler
until next use.
Stamp or signature:
196