Environmental Protection Measures - Ecolab EMP KKS E60 Manuel D'utilisation

If you are not sure you have a current version of the safety data sheet, please contact
your Ecolab consultant. He/she will be glad to assist you in ensuring that the measures for
safeguarding health in the workplace are guaranteed.
DANGER!
The safety data sheets must be displayed close to the instrument or close to
the supply containers so that the relevant countermeasures can be initiated in
the event of an accident.
Hazard arising from automatic start-up
DANGER!
Automatic start-up poses a hazard in areas marked with the symbol opposite.
An automatic start-up can be initiated as soon as the power supply is
connected with no need to press a switch/button beforehand.
CAUTION!
The operator of the pump is responsible for avoiding the risk of an accidental
startup of the pump after the power is reconnected using suitable higher level
measures!
Hazards caused by pressurised components
DANGER!
Danger of injury from pressurised components!
With improper handling, pressurised components can move uncontrollably and
cause severe injuries. Liquid under high pressure can escape from pressurised
components if handled improperly or in the case of a defect. This can lead to
severe or fatal injuries.
– Establish a pressure-free state.
– Discharge any residual energy.
– Make sure that liquids cannot discharge accidentally.
– Immediately call in qualified staff to replace defective components which
are pressurised during operation.
2.7.3

Environmental protection measures

ENVIRONMENT!
The environmental symbol denotes environmental protection measures.
21
Safety
417101442 Rev. 12-02.2019