Main Setting Of Configuration - Ecolab EMP KKS E60 Manuel D'utilisation

9.7.2

Main setting of configuration

The following factory settings are defined in the configuration.
Configuration of
language:
unit:
code:
auto start:
metering lock:
low level contact:
alarm output:
pulse memory:
oval gear meter:
metering controler:
meter monitor:
microflow:
batch:
degas:
microflow
Standard
German
Ä Chapter 10.3.3 'Configuration / Language' on page 72
litre
Ä Chapter 10.3.4 'Configuration / Unit' on page 73
not active (-)
Ä Chapter 10.3.5 'Configuration / Code' on page 73
not active (-)
Ä Chapter 10.3.6 'Configuration / Autostart' on page 74
not active (-)
Ä Chapter 10.3.7 'Configuration / Metering lock' on page 75
open ()
Ä Chapter 10.3.8 'Configuration / Low-level contact' on page 76
off (l)
Ä Chapter 10.3.9 'Configuration / Alarm output' on page 77
not active (-)
Ä Chapter 10.3.10 'Configuration / pulse memory' on page 78
not active (-)
Ä Chapter 10.3.11 'Configuration / Oval gear meter (only E60
OGM PLUS )' on page 80
not active (-)
Ä Chapter 10.3.12 'Configuration / Metering controller (only E60
PLUS
OGM )' on page 81
not active (-)
Ä Chapter 10.3.13 'Configuration / Metering monitoring' on page 82
not active (-)
Ä Chapter 10.3.14 'Configuration / MicroFlow
not active (-)
Ä Chapter 10.3.15 'Configuration / Batch' on page 93
not active (-)
Ä Chapter 10.3.16 'Configuration Degas
Only appears on the display in conjunction with the MicroFlow
monitor, which is available as an accessory.
63
Startup
PLUS &
PLUS
PLUS ' on page 87
PLUS ' on page 97
PLUS
metering
417101442 Rev. 12-02.2019
&