Operating Data / Litre; Operating Data / Amount Of Pulses - Ecolab EMP KKS E60 Manuel D'utilisation

Menu description
10.5.3

Operating data / Litre

The metered quantity in litres since the pump was first commissioned or last reset is
displayed. On operating the pump without an oval gear meter, this value is calculated
(ml/stroke x number of metered strokes). If an oval gear meter is connected, the
measured quantity is displayed (determined from the number of oval gear meter pulses).
Fig. 84: Operating data Selecting / Displaying / Deleting
10.5.4

Operating data / Amount of pulses

The number of pulses received via the pump's pulse input
(plus II pins 3+4,
pulse signal, standard signal, metering lock, batch and metering monitoring ' on page 39)
since it was first commissioned or last reset is displayed.
Fig. 85: Operating data Selecting / Displaying / Deleting
417101442 Rev. 12-02.2019
Ä Chapter 7.2.3 'Connector assignment of slot II (5-terminal) Input for
106