Tubing And Breastpump Care; Tubing Care - Medela Symphony Mode D'emploi

7. Tubing & Breastpump Care
Supplies needed:
• Mild dish soap
• Clean dish towel
• Clean sink or bowl
• Drinking quality water
• Damp (not wet cloth)
Parts needed:
• Tubing
• Symphony ® pump
• Membrane cap
• Protective membrane
3
Use a damp (not wet) cloth to wipe the
pump and membrane area.
Warning
Breastpump kits are a personal
care item intended for use by a
single user only and should not
be shared between users.
16
7A. Tubing care
• Inspect tubing after each pumping session.
Caution
• Do not store wet or damp parts as mold may develop.
• If tubing becomes moldy, discontinue use and replace
tubing. Contact Medela Customer Service at customer.
service@medela.com or call 1-800-435-8316.
Note
Tubing should only be washed if there is any
sign of condensation or milk.
4
Remove, tubing, protective
membrane, and membrane cap.
Clean following steps in section 5.
7
• Wash tubing in warm soapy water.
• Rinse tubing with clear water.
• Hang to air dry.
• Or shake out any drops of water from the
tubing and let the pump run with tubing
attached for 1-2 minutes until dry.