Installation Dimensions; Duocontrol Installation And Connection - Truma DuoControl Mode D'emploi

Installation dimensions

52 59
30
Fig. 3 Dimensions in mm. Not shown to scale

DuoControl installation and connection

Figure 4
The DuoControl must be installed in such a way that the
high-pressure hose connections are in the highest possible
position, which must be at least higher than the cylinder valve
level (broken line).
20
The high-pressure hoses must slope downwards all the way
to the cylinder valve.
133
63
sure regulation system, particularly while driving.
The DuoControl must always be installed in such a way
that the high-pressure hose connections are arranged
horizontally.
56
Figure 5
If the height available in the cylinder box is limited, we recom-
mend fastening the DuoControl to the cylinder box cover.
The DuoControl is connected to the high-pressure line via the
M20 x 1.5 (G.13) male thread on the inlet side and is connect-
ed to the gas pipe via an olive screw connection (8 or 10 mm)
on the outlet side.
For 8 mm gas pipes, use the enclosed adapter Z 10 / RVS 8
(part no. 50020-04000) (retail only). For 10 mm gas pipes, use
the enclosed adapter Z 8 / RVS 10 (part no. 50000-06500).
Installation above the cylinder valves makes it more diffi-
cult for gas in the liquid phase to penetrate the gas pres-