Installation Instructions - Truma Panel BC 430 Instructions De Montage

Installation instructions

Remove the equipment pack (accessories) and check it is
complete:
1 instructions for installation and use
1 7-wire control cable, 5 m long
4 mounting screws
Assembly
Install the panel in a place that is protected from damp and wet.
Prepare an installation opening for the device.
R 4
Dimensions in mm.
78
Dia 1.5
Connect the BC (430, 630, 860) panel via the control cable to
the "Connection for the charge control panel" of the charger.
Attach the device with the supplied screws.
7