Switching On The Sauna Control Unit; Starting Sauna Mode - Sentiotec PRO-C3 Instructions Pour L'installation Et L'utilisation

Instructions for use for the user

10.2. Switching on the sauna control unit

WARNING!
Risk of fire
Flammable objects that are placed on the sauna heater could ignite and
cause fires.
● NEVER place flammable objects on the sauna heater.
● Make sure that NO flammable objects have been placed on the sauna
heater before the sauna control unit is switched on.
● Press the ON/OFF switch 6, to switch on the sauna control unit.
► The function selection switch 2 lights up.
Basic operation
1. Turn the function selector 2 to the function (Sauna, Humidity, Light,
Fan, Additional output) you wish to start.
2. Select the intensity of the function with the intensity selector 3.
3. Press the intensity selector 3 to start the function.

10.3. Starting sauna mode

1. Turn the function selector 2 to position A (temperature).
► The temperature symbol lights up.
2. Use the intensity selector 3 to set the preferred temperature.
3. Press the intensity selector 3.
► The sauna heater is switched on and begins to heat up.
► The intensity selector 3 lights up.
► Then the current temperature in the sauna room is displayed in the intensity
display 4. In single-sensor mode, the preset temperature is displayed.
p. 36/54