Installation Instructions, Only For Experts; Installing The Control Unit - Sentiotec Infrabox basic S set Instructions Pour L'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation instructions, only for experts

4.2. Installing the control unit

The control unit 2 of the infrared controller is installed on the outside wall
of the cabin with a maximum clearance of 10 metres from the power supply
unit 1 (see Fig. 2). For the installation, a standard jigsaw is required to cut out
the recess for the control unit. The operating unit can be installed both inside
and outside the cabin.
*
For installation inside a sauna cabin, maintain a distance of at least 30 cm to
the ceiling. (see Fig. 2 Control panel position on page 12).
ATTENTION!
Damage to the unit
● The control unit 2 of the infrared controller is splashproof
(protection class IP X4).
● Work on the control panel may only be carried out using a standard screw-
driver. Using a cordless screwdriver may irreparably damage the housing.
min. 30 cm
2
Fig. 2 Control panel position
*
for assembly inside the cabin
Power unit
Infrabox Basic
1
*
Control
unit
External view
p. 12/32

Publicité

Table des Matières
loading

Table des Matières