Switching On; Selecting Operating Mode - Sentiotec WORLD OF WELLNESS wave.com4 Instructions De Montage Et Mode D'emploi

Commande de sauna
Masquer les pouces Voir aussi pour WORLD OF WELLNESS wave.com4:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Instructions for use for the user
p. 18/42

4.3. Switching on

The control unit must be connected to the power supply.
8
a
The left symbol
illuminates constantly. If the time symbol
also illumi-
nates, the automatic switch-on or pre-set time (programming see Point 5 of
these operating instructions) is active and the control unit will switch on after
the displayed time.
4
Pressing the
key switches the control unit on and the cabin light connected
to the control unit starts to illuminate. The operating mode (see Point 4.4. of
these operating instructions) must then be selected.

4.4. Selecting operating mode

After switching on (see Point 4.3 of this manual) select one of the following modes
5
6
with the
and
keys:
„FIN" = Finnish (dry) operation
Confirm your selection with
4
9
. The temperature symbol
illuminates. The
sauna control unit now starts with the configurations last executed or with the
standard values (factory settings) and begins to heat with the last settings of
the respective operating mode.
WORLD OF WELLNESS

Publicité

Table des Matières
loading

Table des Matières