Installing The Foil Sensor (Optional) - Sentiotec PRO-C3 Instructions Pour L'installation Et L'utilisation

Installation instructions, only for experts

4.5. Installing the foil sensor (optional)

If one of the following infrared heat plates is connected to an additional output,
the foil sensor P-ISX-FF must be used:
● IR-WP-100
● IR-WP-175
● IR-WP-390
● IR-WP-510
● When installing the foil sensor, observe the operating instructions for the
infrared heat plates.
● Use of a foil sensor must be activated in the technician menu (see 8.2. Set-
tings in the technician menu on page 29).
● IR-WPHL-100
● IR-WPHL-175
● IR-WPHL-390
● IR-WPHL-510
p. 17/54
EN