Cancelling The Post-Drying Programme; Switching Off Functions; Switching Off The Sauna Control Unit - Sentiotec PRO-C3 Instructions Pour L'installation Et L'utilisation

Instructions for use for the user

10.13. Cancelling the post-drying programme

after the combi-mode, the post-drying programme is started automatically.
This involves heating the sauna room to 80 °C with the fan running for 30 min-
utes. In the intensity display 4, the text "dry" is displayed and the temperature
symbol flashes.
● Press and hold down the intensity selector 3 for a second to cancel the
post-drying programme.
To prevent mould and rot from forming, the post-drying programme should
NOT be cancelled.

10.14. Switching off functions

You can switch off each function individually.
1. Turn the function selector 2 to the function you want to switch off.
► The intensity selector 3 lights up.
2. Press the intensity selector 3.
► This respective device is switched off.
► The light on the intensity selector 3 goes out.
If you switch off the sauna heater (temperature function A), the evapora-
tor (humidity function B) is automatically switched off.

10.15. Switching off the sauna control unit

● Press the ON/OFF switch 6, to switch off the sauna control unit.
► The lights go out on the function selector 2, on the intensity selector
and on the intensity level indicator.
► The sauna control unit is switched off.
p. 45/54
EN