Data Management | Display Of Measured Data - MIETHKE AAG FV907X Mode D'emploi

Reader Unit Set
Press the <Stop> button to stop the measure-
ment. For an explanation of the symbols for
reception quality: see section on "Continuous
measurement".
DATA MANAGEMENT | DISPLAY OF
MEASURED DATA
In the start screen, press the <Menu> button
to display the following submenu:
The <Up arrow> and <Down arrow> buttons
can be used to select the [Data management]
menu, which is confirmed with the <OK> but-
ton.
Measured data are listed chronologically
(from the start of measurement) and shown as
follows:
INSTRUCTIONS FOR USE | GB
The <Up arrow> and <Down arrow> buttons
can be used to select the desired file, which is
confirmed with the <OK> button.
Measured data files are labelled as follows:
Symbol Explanation
Single measurement
Continuous measurement
Fast measurement
An hour glass is shown when loading the data
for a contiouous or fast measurement and the
loading time displayed in seconds.
Single measurement
Press the <Delete> button to delete the mea-
surement file.
41