MIETHKE AAG FV907X Mode D'emploi page 49

Reader Unit Set
NOTE
The setting determines the volume of
acoustic alerts. Exception: Error alerts are
generally emitted at volume level 5.
Standby mode
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the
[Standby mode] menu.
Press the <OK> button to open the [Standby
mode] menu. The following information is dis-
played on the screen:
The <Up arrow> and <Down arrow> buttons
can be used to select the desired time after
which the Reader Unit is to switch to standby
mode, which is confirmed with the <OK> but-
ton. Available settings are 1-5 minutes.
Brightness
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the
[Brightness] menu.
INSTRUCTIONS FOR USE | GB
Press the <OK> button to open the [Bright-
ness] menu. The following information is dis-
played on the screen:
The <Up arrow> and <Down arrow> buttons
can be used to select the desired brightness
of the background illumination, which is con-
firmed with the <OK> button. Possible settings
are 000-100 (in steps of 5).
Contrast
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the [Con-
trast] menu.
Press the <OK> button to open the [Contrast]
menu. The following information is displayed
on the screen:
47