Settings - MIETHKE AAG FV907X Mode D'emploi

GB | INSTRUCTIONS FOR USE
Press the <Exit zoom menu> button to return
to the diagram editing menu.
Switching between displays can take a few
seconds, depending on file size.
Press the <Cursor menu> button in the dia-
gram editing menu to open the following
screen:
The <Exit cursor menu> button takes you
back to the diagram editing menu. Press the
<Left arrow> or <Right arrow> button to move
the time axis to the left or right. Press the
<Pressure axis values> button in the diagram
editing menu to open the following screen:
Use the <Up arrow> and <Down arrow> to
manually set the maximum or minimum scale
values on the cursor position. Make sure that
the [Automatic] function is switched off. If the
[Automatic] function is selected, the setting of
maximum or minimum values is irrelevant. In
this function, axis scaling is automatic accord-
ing to the measured data. Press the <Right
arrow> button to toggle the cursor between
[Maximum], [Minimum] and [Automatic].
44

SETTINGS

Press the <Menu> button in the start screen
to open the following submenu:
Press the <Up arrow> and <Down arrow> but-
tons to select the [Settings] menu.
Press the <OK> button to open the [Set-
tings] menu. The following is displayed on the
screen:
Date/Time
Press the <OK> button to open the [Date/
Time] menu. The following information is dis-
played on the screen:
Reader Unit Set