MIETHKE AAG FV907X Mode D'emploi page 45

Reader Unit Set
The <Exit cursor menu> button takes you
back to the diagram editing menu. Press the
<Right arrow> or <Left arrow> button to move
the time axis to the left or right.
Press the <Pressure axis values> button in
the diagram editing menu to open the follow-
ing screen:
Use the <Up arrow> and <Down arrow> to
manually set the maximum or minimum scale
values on the cursor position. Make sure that
the [Automatic] function is switched off. If the
[Automatic] function is selected, the setting of
maximum or minimum values is irrelevant. In
this function, axis scaling is automatic accord-
ing to the measured data. Press the <Right
arrow> button to toggle the cursor between
[Maximum], [Minimum] and [Automatic].
Press the <Exit menu> button to return to the
measured value display.
INSTRUCTIONS FOR USE | GB
Fast measurement
Press the <Delete> button to delete the mea-
surement. Deletion must be confirmed by
pressing the <Confirmation> button. Press the
button to return to the previous view. Press the
<Exit menu> button to return to the selection
menu. Press the <Editing diagram> button to
open the diagram editing menu.
The following information is displayed on the
screen:
Press the <Zoom menu> button to open the
<Zoom> menu.
Press the <Zoom in> or <Zoom out> buttons
to display an expanded or compressed time
diagram (zoom) of the measured sequence.
43