MIETHKE AAG FV907X Mode D'emploi page 42

GB | INSTRUCTIONS FOR USE
The following information is displayed on the
screen:
Press the <Star> button to place a marker.
Multiple markers can be placed during a mea-
surement process. Press the <Stop> button to
stop the measurement.
Markers permit the circumstantial analysis of
the measured data.
Symbols for reception quality
Symbol
Communication started
Distance from antenna
to measuring cell: - good
Distance from antenna
to measuring cell too
close: - increase distance
Distance from antenna
to measuring cell too
large: - decrease distance
Fast measurement
There are two ways to start a [Fast measure-
ment]:
On the start screen, press the <Fast mea-
surement> button directly and then start the
measurement with the <Start> button. Alter-
natively, you can press the <Menu> button to
display the following submenu:
40
Explanation
Press the <OK> button to open the [Mea-
surement] menu. In the [Measurement] menu,
press the <Up arrow> and <Down arrow> to
select the [Fast measurement] menu.
The following is displayed on the screen:
Press the <OK> button to select the [Fast
measurement].
Press the <Start> button to start the Fast mea-
surement.
During fast measurement, the following is dis-
played on the screen:
Reader Unit Set