MIETHKE AAG FV907X Mode D'emploi page 47

Reader Unit Set
Press the <Right arrow> button to change
the cursor position. Use the <Up arrow> and
<Down arrow> buttons to change the values
at the cursor position.
Modified values are saved immediately.
Units
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the
[Units] menu.
Press the <OK> button to open the <Units>
menu. The following is displayed on the
screen:
The <Up arrow> and <Down arrow> buttons
can be used to select the desired unit, which
is confirmed with the <OK> button.
INSTRUCTIONS FOR USE | GB
Measurement interval
These settings only function in the continuous
measurement mode.
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the [Mea-
surement interval] menu.
Press the <OK> button to open the [Measure-
ment interval] menu.
The following information is displayed on the
screen:
The <Down arrow> and <Up arrow> buttons
can be used to select the desired measure-
ment interval, which is confirmed with the
<OK> button. Possible settings range from
1-300 s. The available memory space on the
SD card is also shown.
Hide graph
In the [Settings] menu, press the <Up arrow>
and <Down arrow> buttons to select the [Hide
graph] menu.
45