Publicité
Notes on completing the model
• Before building the model it is important that you study the plan and read the
instructions right through to the end. Tools can be dangerous; please be aware of
the hazards involved in using them.
• Use cable of adequate cross-section, capable of carrying the currents which will
flow when the model is flying.
• Deploy the receiver aerial as far away as possible (at least 3 cm) from any high-
current cables.
• Before making any glued joints, be sure to clean the surfaces and remove all
traces of grease. We recommend sanding lightly, or wiping with a non-greasy
cleaning agent. The same applies to surfaces to be painted, otherwise the paint is
unlikely to adhere well. Before gluing parts to the fuselage it is essential to
roughen the surfaces with fine abrasive paper and de-grease them with acetone
or similar solvent, otherwise you will not obtain strong, durable joints. This applies
in particular to moulded GRP fuselages.
Additional items required
Glow motor and accessories
Motor
Order No.
OS MAX FS 120
SURPASS III
1886
OS MAX FS 120
SURPASS_E
1848
OS MAX 120 AX
2703
Electric motor and accessories
Motor
Propeller
Order No.
Order No.
Compact 610
40 x 25 cm
29.6 V
1318.45.25
7775
Radio control system
For this model you require at least a five-channel RC system with eight servos.
The transmitter should also feature a servo reverse facility.
We particularly recommend mx-16 to mc-24 computer systems. The model is
designed for standard-size servos.
We recommend the following receiver battery: GRAUPNER 4-2000 NIMH, Order No.
3415, which should be properly maintained before and after each flying session.
Please remember that the pack needs to be cycled (charged and discharged) several
times before it reaches full rated capacity.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler
Capacity
Silencer
cc
Order No.
1886.33
19.96
19.96
1886.33
20.00
2703.33
Spinner
Flight battery
Order No.
Order No.
7775.1
V-MAXX LiPo battery
30C 11.1 V / 4.8 Ah
7664.3 (2 required)
50
Propeller
Order No.
36 x 18 cm
1316.36.18
36 x 18 cm
1316.36.18
38 x 25 cm
1318.38.25
Speed
Battery link
controller
lead
Order No.
Order No.
COMPACT
3031
CONTROL 80
7228
05/2009
Publicité
