After Each Use - Medela Freestyle 27260 Mode D'emploi

3. Cleaning (cont.)

3.2 After each use

Clean all parts that come in contact with your breast and breastmilk.
See image in Section 3.1.
NOTE
l Wash breastpump kit parts after each use.
l Disinfect cleaned breastpump kit parts once daily.
l The breastpump kit requires no maintenance.
l Take care not to damage parts of the breastpump kit during cleaning.
l If the individual components of the breastpump kit are cleaned in a dish
washer, parts may be discoloured by food pigments. This has no impact on
the function.
l Store the dry breastpump kit in a clean bag/bottle until next use.
CAUTION
l Do not store wet or damp parts as mold may develop.
12
Supplies Needed: • mild dish soap
• clean sink or bowl
2
1
Disassemble the Rinse all separated parts
breastpump kit into with cold, clear water
individual parts. (approx. 20 °C) in order
to remove breastmilk
protein residue.
2b
4 5
Rinse all separated parts
Dry with a clean cloth or
with cold clear water for
leave to dry on a clean cloth.
10 - 15 seconds.
I Allow all parts to air dry.
I Store dry parts when not
in use.
I Do NOT store wet or
damp parts.
Questions? www.medela.ca, info@medela.ca or 1-800-435-8316
• clean dish towel or soft brush
• drinking quality water
3
Clean all parts with plenty
of warm soapy water
(approx.30 °C).
I Soak all separated parts
in warm soapy water for
5 minutes.
I Clean with a clean
dish-cloth or soft brush.
Ø
Or (as an alternative
to steps 3 and 4)
I Wash all separated
parts on top rack
of dishwasher.
I Allow all breastpump
parts to air dry in a
clean area.
I Store dry parts when
not in use.
13