Before First Use / After Each Use - Medela Symphony Mode D'emploi

5.2 Before first use / after each use

1
1
Disassemble the pump set into its
individual parts:
– bottle
– multi lid
– breast shield
– connector and connector lid
– membrane
Check all parts for damage. Replace
damaged or worn parts.
2b
Dishwasher
As an alternative to the previous
step 2a, you can also clean the
pump set in the dishwasher. Place
all parts on the top rack or in the
cutlery section. Use a commercially
available dishwashing detergent.
2a
l Rinse all parts with cold, clear
drinking-quality water (approx. 20 °C).
l Clean these parts with plenty of warm,
soapy water (approx. 30 °C). Use a
commercially available washing-up
liquid, preferably without artificial
fragrances and colouring (pH neutral).
l Rinse the parts with cold, clear
drinking-quality water (approx. 20 °C).
3
Drying / storage
Dry with a clean cloth or leave to dry on
a clean cloth.
Put the clean parts in a clean storage
bag or a clean environment. Do not store
parts in an airtight container/bag. It is
important that all residual moisture dries.
15