6. Hands-Free
Parts you will need for this step:
• straps
26
• clasp adaptors
6.1 Hands-free setup
1
2
Snap hands-free strap
Connect hands-free top
assembly onto back of
strap to hands-free bottom
strap by sliding bottom strap
each breastshield body.
Be sure that the hands-free
into top strap clip.
assembly snaps into the
breastshield body and is
secure.
4
5
Attach bottom clips to
If necessary, adjust the fi t
bra band until secure
by moving the bottom strap
fi t is achieved. Be sure
clips to a different strap
the nursing bra fl ap is
setting.
not trapped under the
breastshield.
Questions? www.medela.ca, info@medela.ca or 1-800-435-8316
3
Open your bra fl ap and
insert clasp into your
bra, using bra adaptors if
necessary (see page 26).
6
The strap is fl exible and can
be pulled to remove and
reinsert the clip. Be sure the
round part of the clip sits on
the side of the strap with the
round indentation. After you
move the clip, repeat step 4.
27