Rösle Videro Pure G2 Mode D'emploi page 55

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

B) Connection of gas hose to pressure regulator
(the connection is located downstream of the pressure
regulator)
C) Both screw fixings of multiple connector
(the connection is located on the right side wall of the
lower cabinet)
D) Connection of corrugated pipe to valve unit
(the connection is located on the right side below the
control panel)
E) Apply soapy solution (approx. 50 % liquid soap / 50 %
water) to all parts carrying gas. Alternatively, use a
suitable leak detector spray. Small bubbles form if
the gas hose is leaking.
By means of a visual inspection check whether the
gas hose has cracks, porous areas, wear, indentations or
animal bites.
Also perform the smell test. If you smell gas, the hose
is possibly leaking.
If you detect damage to the hose, the grill must not be
used. The hose must only be replaced with an approved
replacement hose.
F) Quick plug coupling: Connection of side table-gas
hose to grill (the connection is located on the right
and left sides of the firebox)
E
B
C
D
F
55

Publicité

Table des Matières
loading

Table des Matières