Factory Settings Of The Positioner; Installation; Safety Instructions - Burkert 8696 Guide Rapide

6.9 factory settings of the positioner
Functions can be activated via DIP switches:
function parameter
CUTOFF Sealing function below
Sealing function above
CHARACT Select characteristic
DIR.CMD Effective direction set-point
value
Tab. 2: Factory settings - functions
Additional functions are described in the operating instruc-
tions Type 8696.
These instructions can be found on the Internet at
www.burkert.com.
without change to the settings via the communications software a linear
3)
characteristic is stored in FREE.
12
Value
2 %
98 %
FREE
3)
rise
english
Type 8696

Installation

7 insTallaTion
Only for positioner without pre-assembled process valve.
7.1 safety instructions
Danger!
risk of injury from high pressure in the equipment/device.
▶ Before working on equipment or device, switch off the pressure
and deaerate/drain lines.
risk of electric shock.
▶ Before working on equipment or device, switch off the power
supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations
for electrical equipment.
Warning!
risk of injury from improper installation.
▶ Installation may be carried out by authorized technicians only
and with the appropriate tools.
risk of injury from unintentional activation of the system and
an uncontrolled restart.
▶ Secure system from unintentional activation.
▶ Following assembly, ensure a controlled restart.