Configuration Of The Network; System Parameters - Burkert 8642 Instructions De Service

All manuals and user guides at all-guides.com
5

CONFIGURATION OF THE NETWORK

5.1 Memory allocation for the effective data traffic
Basis: handbook for your PLC
In order to be able to carry out the correct settings of the configuration
program, copy the unit-specific file (buer6521.GSD) from Bürkert into the
directory that contains the configuration software.
Further information regarding memory allocation can be found in the handbook.
5.2

System parameters

NOTE
ATTENTION!
5.2.1 Physical block
5.2.1.1 Slot Index: 1
Parameter type:
N
S
D (dynamic)
C (constant)
62
All profile data refers to the profile Version 2.0 of 31.01.97.
There, you will also find detailed information about the
parameters.
When writing in parameters, ensure that the voltage is
present!
non-volatile parameter which must be taken into accountin
the work cycle. It does not belong to the static update
code. however.
Static, non-volatile; when writing, the version counter
ST_REV is incremented
The value will be calculated in the block, or be read from
another block
The parameter does not change.
I/O-Box Type 8642 Id. Nr. 142 791