Pr 6061/05S Set Of Metal Sheets For Novego - Minebea Intec Novego Manuel D'installation

12 Accessories
12.5 PR 6061/05S Set of metal sheets for Novego®
EN-53
No. Identiier
6 Installation overview
The following fastening material is required for mounting:
Washer (3×)
Screw M8 (3×)
Order no. 9405 360 61052
No. Identiier
1 Washer
2 Cap nut M16
3 Nut M16
4 Balance plate 1 mm, 2-parts (3×)
5 Balance plate 2 mm, 2-parts
6 Balance plate 5 mm (3×)
7 Threaded pin M16×70 with coating
8 Additional information 9499 059 60601 (not shown)
Note:
Compliance with additional instructions 9499 059 60601 is mandatory!
Hygienic Weighing Module Novego®
Minebea Intec