Connection; General Information; Load Cell - Minebea Intec Novego Manuel D'installation

6 Connection

6 Connection
6.1

General information

6.2

Load cell

EN-35
NOTICE
The load cell cable end is protected against contamination and moisture by a
protective sheathing.
The protective sheathing should only be removed shortly before connecting!
-
Protect the cable ends against contamination. Moisture must not get into the open
end of the cable
-
Do not shorten the load cell connecting cable. Connect the prepared cable end and
roll up the remaining cable.
- The cable screen may be connected only to the connecting terminals of the indicator.
- Keep the load cell cables away from power cables.
- The distance between measurement cables and power cables and/or components
under high voltage should be at least 1 m (reference value).
- We recommend laying the load cell cables in separate cable trays or armored steel
pipes.
- Power cables should be crossed at right angles while taking into account the
minimum distance of 1 m (reference value).
Color Code
rd = red
gn = green
bu = blue
gy = gray
rd =
gn =
bu =
gy =
S =
+ supply/LC in + supply voltage/+ load cell input
+ meas./LC out + measuring voltage/+ load cell output
- supply/LC in - supply voltage/+ load cell input
- meas./LC out - measuring voltage/- load cell output
screen Screen
Hygienic Weighing Module Novego®
Minebea Intec