Accessories; Connecting Cables; Cable Junction Boxes - Minebea Intec Novego Manuel D'installation

Hygienic Weighing Module Novego®

12 Accessories

12.1 Connecting cables

No. Description
1 PR 6135/××
2 PR 6135/01A (armored)
3 PR 6136/×× (for installation inside the explosion-hazarded area)
4 PR 6136/01A (armored, for installation inside the explosion-hazarded
area)

12.2 Cable junction boxes

No. Description
1 PR 6130/04 (aluminum, 1–4 load cells, IP67)
2 PR 6130/34Sa (1.4301, 1–4 load cells, IP68, IP69, veriiable)
3 PR 6130/35S (1.4301, 1–4 load cells, IP68, IP69, veriiable)
4 PR 6130/64Sa (1.4301, 1–4 load cells, IP68, IP69, veriiable, ATEX)
5 PR 6130/65S (1.4301, 1–4 load cells, IP68, IP69, veriiable, ATEX)
Minebea Intec
To connect the junction box to the weighing electronics, we recommend using the
following connecting cables:
We recommend using the following junction boxes:
12 Accessories
Order no.
9405 361 35××2
9405 361 35019
9405 361 36××1
9405 361 36019
Order no.
9405 361 30044
9405 361 30344
9405 361 30354
9405 361 30644
9405 361 30654
EN-50