Servicing/Repairs/Cleaning; Care And Maintenance; Maintenance; Replacing The Load Cell - Minebea Intec Novego Manuel D'installation

9 Servicing/repairs/cleaning

9 Servicing/repairs/cleaning
9.1

Care and maintenance

9.1.1

Maintenance

9.1.2

Replacing the load cell

EN-41
The load cell PR 6261 is maintenance-free.
WARNING
The vessel may turn over during de-/mounting.
Securing the vessel against tipping is imperative.
Use an appropriate lifting jack.
NOTICE
Defects in the load cell may occur.
Do not lift or transport load cells by pulling the cable.
Note:
The following section describes how to replace load cells in a weighing system with
3 weighing modules.
Example: Frame mounting
1. Release the load cell cable in the junction box, pull it out carefully and roll it up.
Hygienic Weighing Module Novego®
Minebea Intec