Hygienic Weighing Module Novego®
Minebea Intec
2. Loosen the screws (23) in the pendulum base (3) of the defective weighing module.
Note:
Take care to not lose the O-ring (20)!
3. Use an appropriate lifting tool to carefully lift the weighing object (13) to the position
of the defective weighing module.
The weighing module is now only connected to the weighing object.
4. Loosen the screw connection (10) in the weighing object (13) carefully and place the
weighing module on a stable surface.
9 Servicing/repairs/cleaning
EN-42