Roco multiZENTRALEPRO Manuel page 78

3.6.2 "PANID" is information only for service technicians.
3.6.3 "NUMBER OF CHANNELS"
The wireless connection between the multiMAUS
protects the system from interference from other wireless networks such as a WLAN. The devices
search automatically for the best wireless channel for optimal wireless transmissions when being
paired. A total of 16 channels are available. The factory setting is usually sufficient for most application
and operation scenarios. However, should you notice that the data transfer is subject to problems or
interference, or if the wireless signal is frequently dropped, you should increase the number of chan-
nels. Please note that the start process takes longer if the number of channels exceeds the default
number.
Value range: 3–16 channels
Factory setting: 5 channels
Select with the arrow keys and confirm input with the "Light /OK" key. You are returned to "NUMBER
▪
OF CHANNELS."
3.6.4 „LQI"
3.6.5 „LSSI"
These two subitems also serve only to provide information to service technicians.
3.7 "ENERGY"
This menu item is only for the power supply of the multiMAUS
3.7.1 "TURN-OFF TIME"
To save battery power of the multiMAUS
of time when not being used.
Value range: 1–255, factory setting: 10 minutes
Select with the arrow keys and confirm input with the "Light /OK" key. You are returned to
▪
"TURN-OFF TIME."
78
78
and the multiZENTRALE
PRO
PRO .
PRO ., the unut switches off automatically after a defined period
uses technology that
PRO