Roco multiZENTRALEPRO Manuel page 52

Keys
Stop key
in combination with
Shift key
Loco / Turnout key
in combination with
Shift key
Function keys
in combination with
Shift key
Shift key
For users wishing to utilize the many different menu functions of the multiMAUS
Note: The third part starting on page 66 describes everything worth knowing about the programming functions.
Menu key
in combination with
Shift key
in combination with
Function keys
in combination with
Light /OK
52
52
Function
In drive mode:
Emergency stop on entire system
▪
In menu mode:
Return from the respective menu level
▪
In drive mode:
Selective emergency stop for the locomotive selected and displayed
▪
In the "ROUTE" – "EDIT" menu:
Deleting a turnout
▪
Toggling between locomotive and turnout or route mode
▪
Switching between library and locomotive address mode
▪
Switching between turnout and route mode
▪
In drive mode:
Switch the locomotive functions F1 –F10 on or off directly. The locomotive func-
▪
tions F11 –F20 are switched using keys 1 –10 together with the shift key. The acti-
vated locomotive functions can be seen on the display screen.
In menu mode:
Input a locomotive name (alphanumerical) in the library
▪
Fast access to the menu items out of the menu level
▪
In turnout mode:
Input turnout number directly
▪
Switch locomotive functions F11 –F20 on or off. You can check the activated func-
▪
tions by pressing the "shift" key.
In turnout mode:
Call up to 10 saved turnouts (turnout shortcut keys)
▪
In drive mode:
Check the activated functions F11 –F20
▪
Switch to menu mode (press and hold for approximately 5 seconds)
▪
Return directly from all menu levels to locomotive/turnout/route mode
▪
Switch to menu mode
▪
Return directly from all menu levels to locomotive/turnout/route mode
▪
In library or locomotive address mode:
Quick-program CVs 1 –5 and 8 ("MENU" key must be pressed first)
▪
Create, edit, and delete double heading
▪
In turnout mode:
Call up to 10 saved turnouts (turnout shortcut keys)
▪
Switching the multiMAUS
▪
.
PRO
PRO off